ZyXEL Communications UAG50 User Manual page 23

UAG50 User's Guide
Static IP Setting
If Static IP Setting is selected, then this screen will appear. Enter the IP address
information provided by your ISP.
Figure 3-1-7 Internet Connection Setting Screen—Static IP Setting
Item
IP Address
Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
PPPoE (Point-to-Point Protocol over Ethernet)
If "PPPoE" is selected, then this screen will appear. Enter the username, password
and other major fields.
Default
0.0.0.0
Enter the IP address provided by your ISP.
0.0.0.0
Enter the subnet mask for the IP address.
0.0.0.0
Enter the Gateway IP Address provided by your ISP.
Empty
Enter the primary DNS server IP address for the xDSL/Cable connection
(provided by your ISP).
Empty
Enter the secondary DNS server IP address for the xDSL/Cable connection
(provided by your ISP). If the primary DNS Server IP were not available,
meanwhile, Secondary DNS Server IP would start in the same time.
Description
23