Questions And Answers - Gigaset E630H Operating Instructions Manual

Customer service & product warranty – Australia and New Zealand

Questions and answers

If you have any queries about the use of your telephone, suggested solutions are available on
our web-site at
www.gigaset.com/service
The table below also lists steps for troubleshooting.
You are not sure whether your device is equipped with an integrated answer machine.
¥
Open the answer machine menu: v
Your device is equipped with an integrated answer machine if the submenu Activation is available.
The display is blank.
1. The handset is not activated.
¥
Hold down a.
2. The battery is empty.
¥
Charge the battery or replace it (
3. The key and display lock is activated.
¥
Hold down the hash key
" "
No Base flashes on the display.
1. The handset is outside the range of the base.
¥
Move the handset closer to the base.
2. The base is not activated. ¥
Check the base power adapter.
3. The base's range is reduced because Maximum Range is deactivated.
¥
Activate Maximum Range (
"Please register handset" or "Place handset in base" flashes on the display.
The handset has not yet been registered or was de-registered due to the registration of an additional handset
(more than six DECT registrations).
¥
Register the handset again (
Your settings are not accepted.
¥
¢
Ensure that you have set the Profile Personal before you make changes to the device settings
( page 31).
The handset does not ring.
1. The ringtone is deactivated.
¥
Activate ringtone (
2. The phone does not ring if the caller has withheld his number. ¥
Activate the ringtone for unknown calls (
3. The phone does not ring during a specific period or for certain numbers.
¥
Check time control for external calls (
42
¤ ¤
FAQ First steps for troubleshooting.
¤
Ì
¢
page 5).
#
.
¢
page 25) or reduce the distance between the handset and base.
¢
page 8).
¢
page 22).
¢
¢
page 23) .
¤
OK
page 23).