Alarm Clock - Gigaset E630H Operating Instructions Manual

Alarm clock

Alarm clock
Prerequisite: Date and time are set (
É
You can activate/deactivate and set the alarm clock as follows:
v ¤ ¤ ¤
OK
Off
¤
Changing the settings:
- Time: Set the hour and minute for the wake-up time
(time setting
Occurrence: r Daily/Monday-Friday
-
Volume: r Volume can be set at 5 levels or crescendo
-
(increasing volume).
Melody: r Select a ringtone for the alarm call.
-
¤
Press the display key Save.
When the alarm clock is activated, the icon ¼and the alarm time is displayed in idle status.
An alarm call is signalled in the display and with the selected ringtone for a maximum of
60 seconds. During a call, the wake-up call is only signalled by a short tone.
During the sounding of the alarm you can turn the volume ø (up) or ÷ (down) continuously
using the side keys.
Deactivating the alarm call/repeating after a pause (snooze mode)
Prerequisite: One alarm call sounds.
¤
Deactivating until the next alarm call: Press OFF.
Or:
¤
Snooze mode:
Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.
Or:
Press nothing. The alarm call is deactivated after 60 seconds and then repeated after
5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.
34
¢
page 9).
¤ ¤
Alarm Clock OK
¢
page 9).
Activation: r On/
Example
Alarm Clock
Activation:
<On
Time:
12:00
Occurrence:
Monday-Friday
x
Back
>
Save