Advertisement
The following instructions describe the installation process for a point-to-point installation. The
procedure is similar for compatible HDBaseT components. In the event a compatible HDBaseT product
cannot provide power over the HDBaseT cable connection, the DIGI-HD60 product will require a local
power supply.
1.
If the extenders are going to be permanently mounted to a surface, Intelix encourages utilizing
the DIGI-PMK1 mounting bracket.
2.
Turn off power and disconnect the audio/video equipment by following the manufacturer's
instructions.
3.
Connect shieleded Category 5e or greater twisted pair cable with RJ45 connectors between
the transmitter (DIGI-HD60-S) and the receiver (DIGI-HD60-R). TIA/EIA-568B straight-through wiring
connections must be used with all HDBaseT extenders.
4.
Connect an HDMI cable between the display and the receiver (DIGI-HD60-R).
5.
Connect an HDMI cable between the source and the transmitter (DIGI-HD60-S).
6.
Connect the power supply (PS-24D-25, sold separately) to the transmitter or receiver and lock
the power supply to the power connector by twisting the locking collar clockwise.
7.
Power on attached audio/video devices.
DIGI-HD60-S Connections
HDMI Input and Power
DIGI-HD60-R Connections
HDBaseT Input
Instructions
HDBaseT Output
HDMI Output and Power
Advertisement
