Micron Millennia Series Technical Reference Manual page 88

B I O S S E T U P P R O G R A M
8
BIOS Flash Recovery Procedure
If this procedure does not restore your system to
normal operation, please call Micron Technical
Support for further instruction. Refer to the "Service
and Support" section in the Getting Started Guide
for Technical Support contact information.
1 Use another computer to download the current
BIOS from the micronpc.com Support Web site.
2 Unzip/extract the files/image to a bootable floppy
disk.
3 Insert the floppy disk into the system with the
corrupted BIOS.
4 Turn on the computer. You should see a screen similar to the one in Figure 34. The system will
boot to a command prompt.
5 Flash the BIOS by running the appropriate ".bat" file located on the floppy in drive A (example:
flash102.bat). When the flash process has completed, the system should automatically reboot.
6 Remove the floppy disk and press [Delete] to enter the BIOS setup.
7 Load the default settings. See "Defaults Menu" on page 8-80.
8 Save the changes and exit setup. See "Exit Menu" on page 8-84.
8-88
B IO S R e c o v e ry S c re e n
A w a rd B o o tB lo c k B IO S v 1 .0
C o p yrig h t (c ) 2 0 0 0 , A w a rd S o ftw a re , In c .
B IO S R O M c h e c k s u m e rro r
D e te c tin g flo p p y d rive A m e d ia ...
D riv e m e d ia is : 1 .4 4 M b
IN S E R T S Y S T E M D IS K A N D P R E S S E N T E R
Figure 34. BIOS Recovery Screen