Micron Millennia Series Technical Reference Manual page 49

6 Remove the Phillips retaining screws.
Figure 19. Power Supply Retaining Screws
7 Lift the power supply out of the case.
8 Insert the replacement power supply into the chassis and replace the Phillips retaining screws.
9 Reconnect all power supply connectors to the motherboard and peripheral devices.
10 Replace the access panel. See "Replacing the Access Panels" on page 5-32.
I N S T A L L I N G A N D R E M O V I N G H A R D W A R E
Replacing the Power Supply
6-49