Tools And Preparation; Electrostatic Discharge (Esd) Cautions - Micron Millennia Series Technical Reference Manual

TA K I N G A P A R T YO U R S Y S T E M
5

Tools and Preparation

T O O L S A N D P R E P A R A T I O N
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A screwdriver may be required for minor installations. You will need to disconnect the cables on
the back of the computer before opening the access panel.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note
Note how the cables connect to the back for future reference.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution
Be careful when handling access panels, they can be easily marred or scratched.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elec tros tati c D is charge (ESD ) C au tions
1 Leave the module in the antistatic bag until it is ready for installation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution
The motherboard conforms to the new PCI 2.2 specification. This requires 3.3v standby for all PCI
slots, DIMM banks, and PS/2 outputs (KB/PS/2 Mouse). Always remember to unplug the AC power
cord before adding any PCI cards, memory, or plugging/unplugging the keyboard or mouse.
Otherwise, the system may automatically power up when adding the component. This could damage
the motherboard or the component you are adding and is not covered under warranty.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-24