Micron Millennia Series Technical Reference Manual page 83

Table 16: Security Menu Descriptions
Menu Name
. . . . . . . . . . .
Set Supervisor Password
Set User Password
Security Option
Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select this option to enable, disable, or change the Supervisor password. If no password is
currently active, enter a password when prompted and it will be saved. If a password is in use
press [Enter] when asked to enter a password, and the Supervisor password will be disabled.
Select this option to enable, disable, or change the User password. If no password is currently
active, enter a password when prompted and it will be saved. If a password is in use, press [Enter]
when asked to enter a password, and the User password will be disabled.
Default: Setup
Use this option to determine if a password is required when the system boots and when entering
Setup or only when entering Setup. The options are System (requires a password at boot and at
Setup) and Setup (only requires a system when entering Setup).
B I O S S E T U P P R O G R A M
Security Menu
8-83