Removing Access Panel 2 - Micron Millennia Series Technical Reference Manual

Removin g Ac ces s Pane l 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Access Panel 2 needs to be removed only when installing, replacing, or removing a drive.
To remove Access Panel 2:
The computer is shown standing for illustration purposes, it may be easier to work with it if it is laying on its
side.
Remove the screws that secure Access Panel 2 in place.
Figure 7. Removing Screws
TA K I N G A P A R T YO U R S Y S T E M
Removing the Access Panels (Micro-tower)
5-31