Micron Millennia Series Technical Reference Manual page 40

I N S T A L L I N G A N D R E M O V I N G H A R D W A R E
6
Removing and Installing Cards
7 Evenly pull the card straight up with both hands.
Figure 13.
8 Align the replacement card with the slot and push down firmly until the card is set in place.
9 Repeat for all cards.
10 Replace the card retaining screw. See Figure 12, page 6-39.
11 Replace the access panel. See "Replacing the Access Panels" on page 5-32.
6-40
Removing the Card from the Slot