Installing Memory - Micron Millennia Series Technical Reference Manual

I N S T A L L I N G M E M O R Y
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Refer to "System Board" on page 6-37 for the specifications of your motherboard and the exact
location of the memory banks.
To install or replace memory follow these instructions:
1 Remove all external power, data, and audio cables from the computer.
2 Remove Access Panel 1. (See "Removing Access Panel 1" on page 5-28.)
3 Line up the installation keys and press the latching levers open.
Figure 14. Dual In-line Memory Module (DIMM)
I N S T A L L I N G A N D R E M O V I N G H A R D W A R E
Latching Notches
Alignment Notch

Installing Memory

6-41