Operating Instructions - Kärcher HD 2.8/10 ST Ed B Operator's Manual

Garden
Hose
STEP 1: Connect garden hose
to the cold water source and turn
water on completely. Never use hot
water.
On/Off
Switch
STEP 4: Turn machine on by push-
ing switch at front of machine.
The five color-coded quick connect nozzles provide a wide array of spray
widths from 0° to 40° and are easily accessible when placed in the convenient
rubber nozzle holder, which is provided on the front of the machine.
NOTE: For a more gentle rinse, select the white 40° or green 25° nozzle.
To scour the surface, select the yellow 15° or red 0° nozzle. To apply
detergent select the black nozzle.
8

OPERATING INSTRUCTIONS

Cold
Water
Source
STEP 2: Trigger the spray gun to
eliminate trapped air then wait for
a steady flow of water to emerge
from the spray wand. Then install
nozzle.
Safety
Latch
WARNING! Never replace noz-
zles without engaging the safety
latch on the spray gun trigger.
NOZZLES
9.800-086.0 • Rev. 6/10
STEP 3: Connect to appropriate
power supply. Push GFCI reset
button.