Operating Instructions - Kärcher G 2500 DH Operator's Manual

STEP 5:
Attach the wand to the spray gun.
Push the wand (I) into the trigger gun (G) and
then thread the connection.
I
STEP 1:
Pull the spring-loaded collar of the wand
back to insert your choice of quick connect
nozzle.
Release the collar and push the nozzle until
the collar clicks
CAUTION
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
■
Make sure you hear a "click" when inserting
the nozzle tip in to the wand.
■
Pull the nozzle to make sure it is seated
properly before operating your unit.
G

OPERATING INSTRUCTIONS

.
Assembling
STEP 6:
Vertically insert the Spray Gun (G) into the
Gun Holder (D).
STEP 2:
Pull back the spring loaded collar at the spray
gun and insert the high pressure hose.
Release the collar and push the nozzle until
the collar clicks.
CAUTION
High pressure in quick connect area.
Risk of injury caused by improperly locked
high pressure hose.
■
Make sure you hear a "click" when inserting
the high pressure hose in to the quick con-
nection.
■
Pull the high pressure hose to make sure it is
seated properly before operating your unit.
G
D
English 7