TH-103PF10UK/EK
7.32. Removal of C6-Board
1. Remove the Eye Bolt.
(Refer to Removal of C3-Board)
2. Remove the Fan (D).
(Refer to Removal of C5-Board)
3. Remove the Reinforcement Angle (E).
(Refer to Removal of C5-Board)
4. Remove 4 screws of the flexible cable.
5. Remove the flexible cables from the connectors (CA15,
CA16, C61).
6. Disconnect the connector (C64).
7. Remove 4 screws and then remove C6-Board.
7.33. Removal of C7-Board
1. Remove 7 screws and then remove the Fan Block (G)
and Fan (K).
2. Remove 2 screws ( ) and then remove the Rear Cover
Angle (H).
3. Remove the Eye Bolt Covers.
4. Remove 5 screws ( ) and then remove the Rear Cover
Angle (F).
5. Remove 2 screws ( ) of Side Angle (L).
6. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (F).
42