5. Remove 6 screws ( ) and then remove the Reinforce-
ment Angle (B).
6. Remove 6 screws of the flexible cable.
7. Remove the flexible cables from the connectors (CB3,
CB4, CB5, CY0, CY1, CY3).
8. Disconnect the connectors (CY2, CY4).
9. Remove 6 screws and then remove CY-Board.
7.38. Removal of CZ-Board
1. Remove the Reinforcement Angle (B).
(Refer to Removal of CY-Board)
2. Remove 4 screws of the flexible cable.
3. Disconnect the connector (CZ4).
4. Remove the flexible cables from the connectors (CB1,
CB2, CZ1).
5. Remove 4 screws and then remove CZ-Board.
7.39. Removal of DR1-Board (A)
1. Disconnect the Fan relay connectors.
2. Remove 4 screws and then remove the Fan Block (B).
3. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
4. Remove 5 screws and then remove the DR1-Board (A).
45
TH-103PF10UK/EK