9.25. Removal of C4-Board (upper)
1. Remove the Reinforcement Angle (upper_center).
(Refer to Removal of C3-Board (upper))
2. Remove the flexible cables from the connectors (C40,
C41, C42).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11).
4. Remove 6 screws ( ) and then remove C4-Board
(upper).
9.26. Removal of C5-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Disconnect the connector (C55).
3. Remove the flexible cables from the connectors (C50,
C51).
4. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
5. Remove 6 screws ( ) and then remove C5-Board
(upper).
9.27. Removal of C6-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA15, CA16).
4. Remove 4 screws ( ) and then remove C6-Board
(upper).
9.28. Removal of C1-Board (lower)
37
TH-103VX200W