TH-103PF10UK/EK
7.22.2. Removal of V2-Board
1. Removal the S1-Board
(Refer to Removal of the S1-Board and V2-Board)
2. Remove 4 screws (Q).
3. Disconnect the connector (V15) and then remove V2-
Board.
7.23. Removal of SS2-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L),(R))
2. Disconnect the Fan relay connectors.
3. Remove 6 screws and then remove the Fan (D) and Fan
Block (E).
4. Remove 6 screws and then remove the Reinforcement
Angle (E).
5. Remove the flexible cables from the connectors (SS29,
SS30,SS51, SS52, SS53, SS54).
6. Remove 6 screws and then remove SS2-Board.
7.24. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of Side Angle (L)(R))
2. Disconnect the Fan relay connectors.
3. Remove 5 screws and then remove the Fan Block (G)
and Fan (K).
36