TH-103PF10UK/EK
7.19. Removal of SD-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (L), (R) )
2. Remove 6 screws and then remove the Reinforcement
Angle (B).
3. Remove the flexible cables from the connectors (SD1,
SD2, SD3, SD4, SD56).
4. Disconnect the connectors (SD52).
5. Remove 9 screws.
6. Slide SD-Board to the bottom direction to remove SD-
Board from the connectors (SC47, SC48).
Take out so as not damage SD-Board.
7. Slide the SD-Board to the upper direction to remove the
SD-Board.
7.20. Removal of SC-Board
1. Remove SU-Board.
(Refer to Removal of SU-Board)
2. Remove SM-Board.
(Refer to Removal of SM-Board)
3. Remove SD-Board.
(Refer to Removal of SD-Board)
4. Remove the Eye Bolt and Eye Bolt Cover.
5. Remove 5 screws and then remove the Rear Cover Angle
(A).
34