TH-103PF10UK/EK
7.40. Removal of DR1-Board (B)
Attaching short jumper to connector (DR6).
Attach Short Jumper to the connector (DR6) when replacing
DR1-Board.
1. Disconnect the connectors (DR1, DR2, DR3, DR4, DR5).
2. Remove 5 screws and then remove DR1-Board (B).
3. Remove Short Jumper attaching to the connector (DR6)
on DR1-Board you removed and attach it to the connector
(DR6).
7.41. Removal of DR2-Board (A)
1. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
2. Remove 5 screws and then remove DR2-Board (A).
7.42. Removal of DR2-Board (B)
Attaching short jumper to connector (DR16).
Attach Short Jumper to the connector (DR16) when replacing
DR2-Board.
1. Remove 4 screws and then remove Fan Block (E).
2. Disconnect the connectors (DR11, DR12, DR13, DR14,
DR15).
3. Remove 5 screws and then remove DR2-Board (B).
4. Remove Short Jumper attaching to the connector (DR16)
on DR2-Board you removed and attach it to the connector
(DR16).
46