TH-65PB2E
8.14. Removal of SS2-Board
1. Remove SS-Board.
(Refer to Removal of SS-Board)
2. Remove the flexible cables from the connectors (SS65,
SS67).
3. Remove the screws and then remove SS2-Board.
8.15. Removal of Speaker
1. Disconnect the Speaker lead.
• Push the speaker terminal hook and pull out the speaker
lead (+).
2. Remove 5 screws ( ) and then remove the Speaker
Block.
3. Remove 2 screws (B) from each Speaker Block and then
remove the Speaker.
8.16. Removal of C1-Board
1. Remove the screws and then remove the Hanger Metal
(R) and Stand Cover (R).
2. Remove 15 screws ( ).
3. Remove 6 screws ( ) and then remove the Contact Metal
(Bottom).
4. Remove the screws.
5. Remove the flexible cables from the connectors (C10,
CB1, CB2, CB3, CB4, CB5)and then remove C1-Board.
8.17. Removal of C2-Board
1. Remove the Contact Metal (Bottom).
(Refer to Removal of C1-Board)
2. Remove the screws and then remove the Hanger Metal
(L) and Stand Cover (L).
34