Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual page 84

5. Use a screw driver to unscrew the cover lock to the open position as shown.
Figure 39. Unscrewing the cover lock
6. Fully open the cover latch as shown and slide the server cover to the rear until it is disengaged from the
chassis. Then, lift the server cover off the chassis and place the server cover on a flat clean surface.
Note: It is recommended that you wait several minutes to let the server cool before removing the
server cover.
Attention: Handle the server cover carefully. Dropping the server cover with the cover latch open
might damage the cover latch.
Figure 40. Removing the server cover
To reinstall the server cover, see "Reinstalling the server cover and reconnecting cables" on page 193.
70
ThinkServer RD650 User Guide and Hardware Maintenance Manual