Host Bus Adapters (HBA)
The Host Bus Adapter is used to connect your server to external storage devices, such as a storage array.
You can purchase the supported option from Lenovo and install it in your server to enable desired functions.
For a list of ThinkServer options, go to:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
Note: The option kit is designed for different types of servers and might contain additional cables that are
not required for your server.
The following illustrations help you locate the connectors on the AnyRAID adapters, PCIe pass-through
board, and PCIe interposer card.
Note: Depending on the configuration, the AnyRAID adapter, PCIe pass-through board, or PCIe interposer
card installed in your server might look slightly different from the illustrations in this topic.
Lenovo ThinkServer RAID 110i AnyRAID Adapter
The Lenovo ThinkServer RAID 110i AnyRAID Adapter provides SATA software RAID function. The following
illustration shows the connectors on the adapter.
Figure 15. Lenovo ThinkServer RAID 110i AnyRAID Adapter
1
SATA 0–3 connector
Used to connect to the SATA connector 0 (ports 0–3) on the system board. See "System board components"
on page 44.
2
SATA 4–7 connector
Used to connect to the SATA connector 1 (ports 4–7) on the system board. See "System board components"
on page 44.
.
Chapter 3
Product overview
33