Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual page 147

9. Remove the new microprocessor from the protective cover that protects the gold contacts on the
bottom of the new microprocessor. Do not touch the pins on the microprocessor socket and the gold
contacts on the bottom of the new microprocessor.
Figure 109. Do not touch the pins
10. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
1 2
the notches on it with the tabs in the microprocessor socket. Then, carefully lower the new
microprocessor straight down into the microprocessor socket.
Note: The small triangle 3 on one corner of the new microprocessor is the microprocessor orientation
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner 4 of the microprocessor socket.
Figure 110. Installing the microprocessor
133
.
Chapter 6 Replacing hardware