Lenovo ThinkServer RD650 User Manual And Hardware Maintenance Manual page 146

6. Open the small handle
inward to release it from the secured position. Then, open the other small handle
Note: There are two marks on the microprocessor retainer. Open the small handle marked with
first and then open the other small handle marked with . Always follow the correct sequence when
you open the small handles.
Figure 107. Opening the handles of the microprocessor retainer
7. Gently press the microprocessor retainer as shown to open it. Ensure that the small handles and the
microprocessor retainer are in the fully open position.
Note: Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must
be kept as clean as possible.
Figure 108. Opening the microprocessor retainer
8. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the server. Then, remove the new microprocessor from the package.
132
ThinkServer RD650 User Guide and Hardware Maintenance Manual
1 first by gently pressing down the handle a little bit and then pushing the handle
2 in the same way.