Service Call Indications - Brother ADS-2100e User Manual

Appendix

Service Call Indications

If there is an error that cannot be cleared by the user, the machine will indicate that a service call is needed
by lighting up all the LEDs as shown below.
If you see the service call indication shown above, turn the machine off and then on, and then try to scan
again.
If the error has not cleared after turning the machine off and then on, press Scan to PC and then
Scan to USB. The LEDs will light up as shown in the table below to identify the error.
LED Error Indication
Error Code
0×A7
Scan to PC
Scan to USB
0×A9
Scan to PC
Scan to USB
0×E6
Scan to PC
Scan to USB
1
When pressing the Scan to PC key, the LEDs will light up as shown in the table above.
2
When pressing the Scan to USB key, the LEDs will light up as shown in the table above.
Error Indicator
1
2
1
2
1
2
Power Scan to PC
Indicator LED
B
B
Scan to USB
LED
B
223