Brother ADS-2100e User Manual page 136

Scan Using the Control Panel
7
Press Scan to USB on the control panel. The machine starts scanning.
NOTE
The file name will be the current date plus a two-digit sequential number.
(ADS-2600We)
1
Insert a USB flash drive into your machine.
2
Load your document.
3
Swipe left or right, or press d or c to display Scan 2.
4
Press to USB.
5
Press Options.
6
Configure the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size,
File Name, Auto Deskew and Skip Blank Page as needed. Press OK.
NOTE
• To select Long Paper (up to 34in) for Document Size, use these settings:
• Auto Deskew: Off
• 2-sided Scan: Off
• If you want to save the settings as a new default, press Set New Default.
• If you want to restore all settings to the factory settings, press Factory Reset.
7
Press Start.
The machine starts scanning, and then the scanned data is saved on the USB flash drive.
NOTE
If you want to save the settings as a shortcut, press Save as Shortcut. For more information, see Set
Up Shortcuts (ADS-2600We only) on page 161.
IMPORTANT
DO NOT remove the USB flash drive while the machine is scanning to the USB flash drive to avoid
damaging the drive or the data stored on it.
6
125