Brother ADS-2100e User Manual page 198

Routine Maintenance
6
Place a new Pick-up Roller into the machine.
NOTE
Identify the left and right sides of the Pick-up Roller before inserting it.
7
Slide the Pick-up Roller a to the left edge while turning the Pick-up Roller.
8
Close the Pick-up Roller Cover.
9
Close the Front Cover and the Top Cover.
0
Reset the counter (see Reset the Usage Counters on page 188).
NOTE
Confirm the following items:
• The value of Pick-up Roller Count is 0 (see Check Supplies Replacement Cycle on page 181).
• The error message on the Status Monitor has been cleared.
• The LCD or LED indications do not show Replace Roller or Replace Parts.
a
8
187