Change The Default Settings Of A Button; Scan Specific And Irregular Sized Documents Using The Carrier Sheet - Brother ADS-2100e User Manual

Scan Using Your Computer

Change the Default Settings of a Button

You can change the default settings of the
(File) buttons.
1
Hold down the Control key on your keyboard, and then click the ControlCenter2 scan button that you
want to change. When the menu appears, click Software Button or Device Button. The settings dialog
box will appear.
2
Choose the settings for File Type, Scan Type, Document Size, Brightness, Contrast, and
Continuous Scanning as needed.
You can also choose the setting for 2-sided Scanning.
3
Click OK. The new settings will be used as the default settings.

Scan Specific and Irregular Sized Documents Using the Carrier Sheet

1
Load the Carrier Sheet (see Receipts, Clippings, Photos, and Other Documents on page 35).
NOTE
Load only one Carrier Sheet at a time.
2
Click the (ControlCenter2) icon in the Dock
The ControlCenter2 window will appear.
NOTE
If the (ControlCenter2) icon is not displayed in the menu bar, double-click the ControlCenter icon.
The ControlCenter icon is in Go from the Finder bar/Applications/Brother.
The (ControlCenter2) icon will appear in the menu bar.
(Image), (OCR),
5
(E-mail), and
5
78
5