Automatic Daylight Saving Time; Sleep Mode - Brother ADS-2100e User Manual

General Information

Automatic Daylight Saving Time

You can set the machine to change the time automatically for daylight saving time. The time will be adjusted
forward one hour in the spring and adjusted backward one hour in the autumn. Make sure you have set the
correct date and time in the Date & Time settings.
The factory setting is Off, therefore, you will have to change the Automatic Daylight Saving Time setting to
On as follows.
1
Press .
2
Press a or b to display Initial Setup.
3
Press Initial Setup.
4
Press Date & Time.
5
Press Auto Daylight.
6
Press On (or Off).
7
Press .

Sleep Mode

You can enter how long the machine must remain idle (the maximum setting is 90 Mins and the default
setting is 15 Mins) before it enters Sleep Mode. The timer will restart if any operation is carried out on the
machine. If a wireless network is enabled, the machine will not enter Sleep mode. To disable the wireless
network, see WLAN Enable/Disable (ADS-2600We only) on page 208.
1
Press .
2
Press General Setup.
3
Press Ecology.
4
Press Sleep Time.
5
Enter the length of time the machine is idle before entering Sleep Mode.
6
Press OK.
7
Press .
1
1
1
16