Oce Arizona 250 GT User Manual page 59

Network Connection Settings
Note: Typcally, DHCP is used to automatically obtain network settings. If "Use
DHCP" is selected, the only thing you might want to change is the network name of
the printer. The settings are displayed to troubleshoot possible network connection
problems. One situation that would require changes is if your network does not use
DHCP to automatically obtain network settings. In this case network settings have
to be entered manually. If you don't know how to do this, bring in a network
consultant to determine what the setting must be for the network (alternately, you
can purchase a DHCP router for your network that will automatically supply the
network settings).
Network Name
Printer Description
Network Adapter Name
MAC Address
Use DHCP
IP Address
Subnet Mask
Note: If Ethernet network cable is disconnected, you will not be able to set up the
DHCP or the Static Network Address.
A network name for the printer cannot consist of numeric characters only - it must
be a mix of alpha-numeric characters.
User Interface Settings
Languages Supported
The user interface can be set to display the following languages:
English - US
English - UK
German
French
Dutch
Japanese
Italian
Spanish
Measurement Units
Allows you to specify how to display offsets and dimensions units:
Metric
Imperial
Printer Settings Module
59