Point-Of-Care Terminal Cleaning And Disinfecting - Advantech POC-W242 User Manual

1.4 Point-of-Care Terminal Cleaning and
Disinfecting
During normal use of the POC (Point-of-Care Terminal) the device may become dirty
and should be regularly cleaned.
Steps:
1. Prepare cleaning agent per manufacturer's instructions or hospital protocol.
2. Wipe the POC with a clean cloth that has been moistened in the cleaning solu-
tion.
3. Wipe thoroughly with a clean cloth.
Cleaning agent list: chemical disinfectants which have been tested on the POC
No
1
2
3
4
5
6
7
8
9
10

Caution!


POC-W242 User Manual
Cleaning Agents
Cidex
Isopropyl alcohol
Green tinctured soap
Windex
Alcohol
Alcohol 70%
Chloride 1000PPM
Incidin plus
Incidin liquid
Mikrozid liquid
Do not immerse or rinse the POC or its peripherals. If you acciden-
tally spill liquid on the device, disconnect the unit from the power
source. Contact your Biomed Department regarding the continued
safety of the unit before placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol. Do not autoclave or
clean the POC or its peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
6