Facing Material - Heat & Glo TRUE-36C Owner's Manual

Combustible Mantel Projections
1/2 IN.
NON-COMBUSTIBLE
MATERIAL
TRUE-36
TRUE-42
Note: All measurements in inches.
Note: Measurement is taken from top of the opening,
NOT the top of the fi replace.
Figure 13.8 Combustible Mantel Allowance - TRUE-36, TRUE-42
Non-Combustible Mantel Projections
1/2 IN.
NON-COMBUSTIBLE
MATERIAL
TRUE-36
TRUE-42
Note: All measurements in inches.
Note: Measurement is taken from top of the opening,
NOT the top of the fi replace.
Figure 13.9 Non-Combustible Mantel Allowance - TRUE-36, TRUE-42
MAX.
12
9
6
3
21
MIN.
18
1
15
12
9
FIREPLACE
OPENING
MAX.
12
10
21
MIN.
18
6
1-1/4 IN. SEE
SECTION 13.D
FIREPLACE
OPENING
Heat & Glo • TRUE-36, TRUE-42 • 2281-900 Rev. C • 5/12
D. Facing Material
• Metal front faces may be covered with non-combustible
materials only.
• Facing and/or fi nishing materials must not interfere with
air fl ow through louvers, operation of louvers or doors,
or access for service.
• Facing and/or fi nishing materials must never overhang
into the glass opening.
• Observe all clearances when applying combustible
materials.
WARNING! Risk of Fire! DO NOT apply combustible
materials beyond the minimum clearances. Comply with
all minimum clearances to combustibles as specifi ed in
this manual. Overlapping materials could ignite and will
interfere with proper operation of doors and louvers.
COMBUSTIBLE MATERIAL
0 IN.
0 in.
NON-COMBUSTIBLE
A
MODEL
in.
TRUE-36 61 1549
TRUE-42 67 1702
Figure 13.10 Non-combustible Facing Diagram
0 IN.
A
B
BOARD
B
mm in. mm
57-5/8 1464
62-5/8 1591
49