Framing And Clearances; Selecting Appliance Location - Heat & Glo TRUE-36C Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
D
D
A
TRUE-36
TRUE-42
Figure 5.1 Appliance Locations
A
B
C
Note: Dimensions below refer to a framed wall on
which 1/2 inch wall sheathing has not been installed.
E
A
Inches 74-1/4
Millimeters 1886
Inches 78-9/16
Millimeters 1995
Heat & Glo • TRUE-36, TRUE-42 • 2281-900 Rev. C • 5/12
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
F
B
B C D
59-1/2 105 26-1/2
1511 2667 673
65-9/16 111-1/16 28-5/8
1665 2821 727
F
B
E
E F
23-1/2 29-3/4
597 756
23-1/2 32-13/16
597 833
19