Covers; Removing The Left Side Cover - IBM RS/6000 44P 170 Installation Manual

Covers

Before performing these procedures, read "Safety Notices" on page vii.
Use the following steps when removing or replacing the left side cover.

Removing the Left Side Cover

1. Shut down the system as described in "Stopping the System Unit" on page 22.
2. Unplug the power cable.
3. Turn the key lock on the rear cover of the system unit to the unlocked position.
4. Place your index finger behind the left cover detent located toward the rear of the
system unit.
Keylock Keylock
(Shown in the unlocked position) (Shown in the unlocked position)
Chapter 3. Installing Options for the RS/6000 44P Series Model 170
23