Step 7: Connect The Display; Step 8: Attach The Display Cable Toroid - IBM RS/6000 44P 170 Installation Manual

Step 7: Connect the Display

Connect the graphics display cable to the back of the display and to the graphics
adapter connector.
For more display instructions, see your display documentation.
Note: Some displays require an additional cable.
If you have an ASCII terminal, you must connect it to the serial connector S1, but do
not connect it at this time. Wait until you reach "Step 12: Connect the Serial and
Parallel Devices" on page 8 for instructions.

Step 8: Attach the Display Cable Toroid

If the cable for your display does not include a toroid, locate the toroid shipped with
your system unit and follow the installation instructions included with the toroid.
.
4
44P Series Model 170 Installation Guide