Step 2: Read The Safety Notices; Step 3: Need Help; Step 4: Are All Of The Internal Options Installed - IBM RS/6000 44P 170 Installation Manual

Step 2: Read the Safety Notices

Safety Note: Before continuing, refer to the System Unit Safety Information book for

Step 3: Need Help?

If you encounter difficulties while setting up your system unit, contact your sales
representative for assistance.

Step 4: Are All of the Internal Options Installed?

These instructions are for RS/6000 44P Series Model 170 systems that have internal
options (such as adapters, disk drives, or memory upgrades) already installed. If you
have internal options that are not installed, go to "Chapter 3. Installing Options for the
RS/6000 44P Series Model 170" on page 21, then return to "Step 5: Position the
System Unit and Display" on page 3.
2
44P Series Model 170 Installation Guide
Danger and Caution notices. Do not plug any cables into the system unit,
adapters, or electrical outlets until you have reviewed this information.
Make sure none of the power cords are connected before continuing to
the next step.