Table of Contents
Advertisement
Installation
This section provides instructions for installing the CS 3T speakers and the CS 120P
enclosure. Topics include:
•
•
•
•
•
•
•
Installation Considerations
WARNING: May result in serious injury. Installation and service must be performed
AVERTISSEMENT : Risque potentiel de blessure grave. L'installation et l'entretien
•
•
•
NOTE: Installation of conduit and conduit adapters must conform to all applicable
Installation Configurations
The CS 3T can be configured in the following ways:
•
•
For hard ceiling installations, see
page 30.
Installation Considerations
Installation Configurations
Installing the CS 123T — Single Installer
Installing the CS 120P in a Suspended Ceiling — Division of Labor
Installing the CS 3T in a Suspended Ceiling — Division of Labor
Installing the CS 120P in a Hard Ceiling
Painting the Baffle and Grille
by authorized personnel only.
doivent être effectués par le personnel autorisé uniquement.
All wiring and electrical connections must conform to all applicable building codes and
local ordinances.
Installation in a plenum-rated environment requires plenum rated cable or conduit.
If using secondary support cables, the installer provides the cables.
building codes and local ordinances.
Open-back: For configurations in which the CS 120P is not used, use the ceiling
mount kit accessory, available at www.extron.com. The C-ring spreads out the
clamping force of the dog-legs when used in drop ceilings and gypsum ceilings.
Using the CS 120P: When used with the CS 120P, the CS 3T can be placed in plenum
environments. This is the only configuration that is UL 2043 rated.
NOTE: The CS 120P can be ordered separately or as part of the CS 123T kit.
Installing the CS 120P in a Hard Ceiling
CS 3T and CS 120P User Guide • Installation
on
4
Advertisement
Table of Contents
