Features - Extron electronics CS 3T User Manual

Features

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Patented two-piece speaker system for suspended ceilings in division-of-labor
installations —
CS 120P plenum ceiling tile enclosure, 1' x 2' (30.5 cm x 61 cm), pair
•
CS 3T full-range speaker cartridge, pair
•
Components available separately or together in a CS 123T complete assembly
•
Enclosure and speaker cartridge can be installed separately by low-voltage
and AV system contractors
Provides significant time and cost savings in ceiling speaker installation
3" (7.6 cm) full-range driver
165° conical dispersion provides wide coverage and allows for flexible speaker
placement
8 ohm direct or 70/100 volt operation on a 6 position, behind-the-grille
selector —
8 ohm direct
•
70 volt: 16, 8, 4, 2, and 1 watt selectable
•
100 volt: 16, 8, 4, and 2 watt selectable
•
16 watts continuous pink noise, 32 watts continuous program
Internal driver overload protection
Thin bezel and magnetically attached grille
Grille and bezel are available in white only and may be painted to match
environment
Spring-loaded locking arms on the CS 3T for quick installation
Fast-installing enclosure speeds installation; no tile bridge necessary
UL 2043 plenum rated enclosure
Low profile, 5" (12.7 cm) deep enclosure for plenum environments
Compatible with US 2' x 2' ceiling grids and metric 600 mm x 600 mm ceiling
grids
Reinforced enclosure minimizes acoustical vibrations
5 year parts and labor warranty
CS 3T and CS 120P User Guide • Introduction 2