Summary of Contents for Clinton Electronics CE-CC115-W
Page 1
High Resolution Color Day/Night Box Camera CE-CC115-W...
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ßö Features Warning ßö The camera requires periodic inspection. Horizontal Resolution of 540 TV High Sensitivity Contact an authorised technician to carry out the inspection. Lines The built-in high sensitivity SONY COLOR Clear image quality has been achieved by CCD enables a clear image even in Stop using your camera when you find it malfunctioning.
ßö Contents Features Camera Operation ßöMenu Warnings and Precautions ßöSettings • LENS (selection) Components • SHUTTER (condition and speed control) Names and Functions of Parts • WHITE BALANCE control ßöFront • BLC (Back Light Compensation) ßöBottom • AGC (Auto Gain Control) ßöBack •...
Page 5
ßöPrecautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera pointed extreme temperature conditions. environment where the humidity is high. it to physical shocks. directly at strong light.
ßöComponents Names and Functions of Parts ßö Front 1. COLOR BOX CAMERA 2. AUTO IRIS LENS CONNECTION PLUG 3. L-WRENCH 4. C-MOUNT ADAPTOR •L Lens protection cap Cover the lens when not using it. •M CS-Mount lens adaptor Attach the CS-Mount lens here. •N Back Focus clamp screw 5.
ßöInstallation Installation ßö ßö Lens 3. Remove the cover of the auto iris lens connection plug and solder the lens cable to the connector pin in the plug. Lenses are sold separately. Lenses such as auto iris lens, LENS CS-Mount lens and C-Mount lens can be used. Pin No.
Installation ßö ßö Connecting to a monitor When using a CS-Mount lens Take off the lens protection cap and attach Connect the video output terminal located on the back of the camera to the CS-Mount lens to the camera by screwing it in the monitor.
ßöCamera Operation ßö Menu ßö Settings Settings can be made using the 5 buttons located on the back of the camera. SETUP menu LENS (selection) ¶U MANUAL ¶U DC/VIDEO OSD EXTRA IRIS JACK VIDEO OUT SHUTTER POWER ¶U ESC ¶U MANUAL ¶U FLK (condition and speed control) VIDEO...
ßöCamera Operation ®\ DC/VIDEO : Auto Iris Lens selection SETUP Select any function you Modes can be changed LENS MANUAL wish to operate by using the LEFT and SHUTTER Note using the UP and RIGHT buttons. WHITE BAL. DOWN buttons. BACKLIGHT •...
Page 12
ßöCamera Operation SHUTTER (condition and speed control) WHITE BALANCE Auto or manual control can be selected. The screen colours can be adjusted using the WHITE BALANCE function. 1. When the SETUP menu is on the screen, position the cursor to point to 1.
Page 13
ßöCamera Operation BACKLIGHT(Back Light Compensation) AGC (Auto Gain Control) When there is a strong backlight behind the object, clear images of the 1. Position the cursor to point to 'AGC' on the SETUP menu by using the background as well as the object can still be obtained by using the UP and DOWN buttons.
Page 14
ßöCamera Operation DNR (Digital Noise Reduction) The level of background noise in low light decreases automatically as the 1. Position the arrow to point to 'SENS UP' on the SETUP menu by using level of gain changes. the UP and DOWN buttons. 2.
Page 15
ßöCamera Operation SPECIAL 1. Position the cursor to point to 'SPECIAL' on the SETUP menu by using 3) Press the SET button. the UP and DOWN buttons. 2. Select the mode required by pressing the UP or DOWN button. SPECIAL CAMERA ID COLOR SYNC...
Page 16
¡á Camera Operation 5) When the camera ID is complete, select a position for the name to be Note displayed. ¤ýWhen the AGC is turned off, COLOR does not operate. ¤ýWhen an infrared light is used, there may be a problem with focusing. ¨ç...
Page 17
ßöCamera Operation • Please select the area you do not wish to appear from the 4 areas in ®\ MOTION DETECTION: AREA SEL mode. This product has a feature that allows you to observe movements of objects • Please select ON mode for the chosen area. in 4 different areas on the screen, and the words 'MOTION DETECTED' •...
ßöTroubleshooting If there are problems with the camera operation, check the tables below. If Problems Troubleshooting the problem persists, please contact the agent who supplied the product. The MOTION • Check if 'MOTION DETECTION' mode is Problems Troubleshooting DETECTION function is turned on.
Need help?
Do you have a question about the CE-CC115-W and is the answer not in the manual?
Questions and answers