Download Print this page
Clinton Electronics CE-505-Z-IR User Manual

Clinton Electronics CE-505-Z-IR User Manual

Filter changable 10x af zoom bullet camera

Advertisement

Quick Links

Advertisement

loading
Need help?

Need help?

Do you have a question about the CE-505-Z-IR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clinton Electronics CE-505-Z-IR

  • Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Page 3 Warning ßö ßö ßö Features The camera requires periodic inspection. A/F 10x Optical Zoom Day & Night Contact an authorised technician to carry out the inspection. This camera has a function that auto- The built-in optical zoom lens is a matically selects the mode that is Stop using your camera when you find it malfunctioning.
  • Page 11: Camera Operation

    ßö ßöCamera Operation 3. Press SET button. 5. Select on Screen position of the CAM TITLE. •L Move the cursor to ‘POS’ and press SET buttor. 4. You can enter up to 15 characters. •MThe CAM TITLE is displayed on the top-left of the monitor screen. •L Move the cursor to the character entry field using the LEFT or RIGHT (Default position) button.
  • Page 14 ßö ßöCamera Operation ¶UFAST : To move zoom fast. ¶U ¶U ¶USLOW : To move zoom slowly. ¶U ONE PUSH : Focus is automatically adjusted just once, after zoom position is changed. Select ' Note ONE PUSH' and press the SET button to •...
  • Page 16 ßö ßöCamera Operation IRIS : Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using ¶U ¶UA. FLK (NTSC: 1/100, PAL: 1/120) : Flicker-free mode the UP or DOWN button and then select the desired iris mode using the ¶U ¶UESC : Automatic shutter speed setting (optimal) LEFT or RIGHT button.
  • Page 17 ßö ßöCamera Operation AGC (Auto Gain Control) : For brighter image Note 1. Position the indicator over 'AGC' using the UP or DOWN button. • Changing 'AGC' setting from NORMAL to HIGH results in greater sensitivity, as well 2. Set 'AGC' to the desired mode using the LEFT or RIGHT button. as on screen noise.
  • Page 19 ßö ßöCamera Operation PRESET CLEAR : Clear configured preset. ¶U ¶UGROUP SEL : Choose up to eight groups. Each group can consist of four mask areas. ¶U ¶UAREA SEL : Configure eight mask areas. ¶U ¶UAREA MODE : Mask area display. ¶U ¶UMASK TONE : Adjust desired mask color level.
  • Page 21: Troubleshooting

    ßö ßöTroubleshooting If there are problems in operation, please refer to the items below. If the Problems Troubleshooting problem persists, please contact the agent you purchased this product from. The MOTION • Check if 'MOTION DETECTION' mode is Problems Troubleshooting DETECTION function is turned on.
  • Page 22: Specifications

    ßö ßöSpecifications ITEM NTSC Power Supply DC12V / AC24V Dual Power Power Consumption 330mA MAX. (DC12V) / 420mA Max. at Filter Change (DC 12V) 768(H) x 494(V) 752(H) x 582(V) Effective Pixels Image Sensor 1/ 4 inch interline transfer CCD Scanning System 2:1 Interlace Synchronization...