Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VF54IR and is the answer not in the manual?

Questions and answers

Summary of Contents for Clinton Electronics VF54IR

  • Page 4 The camera requires periodic inspection Stop using your camera if malfunction occurs. If the camera emits smoke or is unusually hot for a long period of time, a fire may result. Unplug device immediately if device exhibits these symptoms.
  • Page 6 • •...
  • Page 8 BNC outp to test monitor plug-in remote connection...
  • Page 9 BNC outpu to test monitor plug-in remote connection...
  • Page 10 SETUP Menu LENS • DC • SHUTTER • AGC • SENSE-UP EXPOSURE • BLC • D-WDR • RETURN • ATW • AWB • AWC SET WHITE BALANCE • MANUAL • S-IR • B/W • COLOR DAY / NIGHT • AUTO 3DNR • ON • OFF • CAM TITLE • D-EFFECT • MOTION SPECIAL • PRIVACY • DEFECT • RETURN ADJUST • SHARPNESS • MONITOR RESET • FACTORY EXIT...
  • Page 11 Power input BNC output to test monitor plug-in remote connection SETUP • • • plug-in remote to test monitor connection SETUP...
  • Page 12 • •...
  • Page 13 •...
  • Page 14 • • •...
  • Page 15 • • •...
  • Page 24 •...
  • Page 25 •...
  • Page 28 •...
  • Page 32 If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact Clinton Electronics Technical Support at 1-800-549-6393 or 815-633-1444. Problem Solution Nothing appears on • Check the power cable, power supply output the screen. and video connection between the camera and monitor. The video image on the • Check if the lens is clean. Clean the lens with screen is dim.
  • Page 33 Camera CE-VF54IR Image Sensor 1/3” Inch SONY (Super HAD) CCD II Resolution 600 TV Lines IR LEDs 42 pcs Effective Pixels 768 (H) x 494 (V) Scanning System 2:1 Interlace S/N Ratio 52dB Sync System Internal Scanning Frequency 15.734 KHz (H), 59.94 (V) Minimum Illumination 0.00001 Lux (Sens-Up x258) Shutter Speed AUTO, 1/60, FLK, 1/250 ~ 1/100,000 Video Output 1.0 Vp-p, 75Ω Power Consumption Max. 650mA (DC12V)(with IR LEDs on), Max. 260mA (AC24V)(with IR LEDs on) Power Requirement...
  • Page 35 v.07.13.11...

Table of Contents