Charging the Battery ..................10 Operating Panel Introduction ..............12 Using the Recharging Dock ..............20 Scheduling Eclean's Cleaning Time (EC 01 Enhanced) ......24 Remote Control .................... 32 Install Solid Freshener ................35 Maintenance - Dust bin & lter................37 Maintenance - Side brush &...
Safety Notice Before using Eclean, please read the Safety Notice carefully and follow the instructions below: Forbidden Do not disassemble the product. The high voltage inside may cause severe harm. Do not place any object and do not sit on the product during operation or non - operation.
Package Content Eclean Main Body Remote Control Filter Cotton x 2 Rechargeable Battery Adapter Recharging Dock Cleaning Brush Dust Bin User’s Manual...
Main Body 1 Remote control receiving port 5 Operation Panel 2 Collision pane 6 Button for removing dust bin 3 Dust bin and Freshener /odor buster 7 Remote control 4 Socket for adapter s EC01 EC01 Enhanced...
Page 6
Ultraviolet light 12 Front wheel Air outlet 13 Roll brush 10 Battery cove 14 Side brush 11 Recharging dock connection 15 Dust suction entrance point 16 Back wheel set...
Battery Installation Push down Step 1 Step 2 Pull Up Affix Put back the cover Step 3 Step 4 Notice Only use factory-installed battery and adapter. Do not touch the battery, the adapter and/or the plug with wet hands. Ensure the adapter is firmly plugged in and do not exposure the plug.
Manual Charging Notice When using Eclean for the first time, please charge the battery for 8 full hours. Please make sure that the power indicator on Eclean flashes blue while charging. After the battery is fully charged, the power indicator...
Page 10
1. When Eclean is lifted or when 2. Eclean is designed with cliff sensor. a foreign object is entangled, Eclean can detect the edge of a stairway Eclean sounds the alarm and the and avoid falling over (avoid operation warning light is on. Eclean will stop near stairway when runnung simple operation.
10 Open space or seconds.) Polygonal empty space Ramdom Wander Spiral Along Wall Spiral “S” shape Spiral Polygonal Spiral Notice In Spiral mode, Eclean will stop moving if comes in contact with any object.
Tie up wires to prevent obstructing Eclean’s movement. “Home” Test Place Eclean near the recharging dock. Turn on Eclean and press Start. After making sure it is operating normally, press “HOME” on the remote control and Eclean will start “Auto-return”...
Page 13
Do not place objects near the recharging dock to avoid obstructing Eclean returning to the recharging dock. To ensure longer battery life, please fully discharge Eclean and charge it for 8 hours once a month.
• CLK (right) indicates time-setting mode. • Brush icon (right): indicates Eclean will start cleaning at scheduled time. 2. Managing schedule Setting the clock (EC 01 Enhanced) 2.1. Eclean will automatically enter clock display mode upon your first use.Default time is Sunday, 00:00 (24-hour mode).
Page 15
If the cleaning time isn’t set properly, the time display will show “-” (see below). If you want to set Eclean to clean on a specific day in a week, press “Wk” button again. “Su” (Sunday) icon will start to flash.If you want to set Eclean to clean on Sunday, press “Wk”...
6. To start cleaning right away Press and hold “GO” button over 5 seconds to instruct Eclean to leave the recharging dock, and it will start cleaning regardless of its charging status.The “START” button on the remote control has the same function.
Vacuum Turn on the power first, and then use the remote control to set and control the Eclean. When done with the remote control, put back onto the upper cover. OFF: Turn off Eclean. START: Start Intelligent Mode and vacuum.
You can easily take out the roll brush by pressing the side of the roll brush and then lift upward (Step1). You can easily put back the brush by making sure the holes of the roll brush lines up with the holes on Eclean (Step2). 2. Lift up 1. Press inward...
Page 23
Cleaning the back wheels Step 1. Turn off Eclean button and then unscrew the back wheel cover. Step 2. Open the back wheel cover. Step 3. Secure back wheels and unplug connector. Step 4. Clean off dust, hair, or any foreign object.
In this case, please adjust the furniture distance. 4. Eclean will not be able to enter the designated vacuuming range or it may become stuck if the height of range is lower than 10 cm. Please prevent the...
Page 25
5. When using the remote control, aim it directly at Eclean. Make sure there is no obstacle such as a wooden board in the path of the sensor. 6. The recharging dock must be attached to the wall. To avoid blocking Eclean’s returning route, do not place anything near the recharging dock.
Q: Why the warning indictor turns on? A: These are the possible reasons: 1. Eclean has been off the ground for over 3 seconds. Please place it on the ground once more. 2. The wheels have been stuck for over 10 seconds.