Guarantee Conditions; Purpose Of The Manual - Selco Genesis 200 AC-DC Repair Manual

1) GUARANTEE CONDITIONS

To specify the present warranty conditions , we remind that
SELCO does not repair under warranty the damages:
a) resulting from attempts by personnel not allowed by
SELCO to install, repair or service the products;
b) resulting from improper use or connection to incompatible
equipment;
c) in products that have been modified or integrated with
other products when such modification or integration can
be the cause of the failure.
The warranties will in any case be invalidated if :
- the customer is not up-to-date with payments
- Selco has not received the warranty card properly filled-in
with required information
- removal or modifing of serial numbers of machines, boards
or parts
- damages are caused by wrong input power supply volta-
ge/connections.
Guarantee conditions - Purpose of the manual

2) PURPOSE OF THE MANUAL

The purpose of this manual is to furnish authorized service
centres with essential information required to repair model
Genesis 200 (TLH and AC-DC).
To avoid serious personal injury or damage to property, it is
vital this manual be used by qualified technical personnel only.
Selco s.r.l. declines all responsibility for any injury or damage
to property caused whilst repairs are being carried out, inclu-
ding any injury or damage to property subsequent to the rea-
ding or putting into practice of the contents hereof.
For a detailed description of operation, use and routine main-
tenance of the machine, refer to the "Owner's manual", which
must always be kept together with the machine.
To perform operations described herein, you will need a digi-
tal multimeter and a clamp-on AC-DC ammeter together with
basic knowledge of how the machine works. A fundamental
grasp of electrical technology is also required.
Repair work consists in locating the faulty part - as this part is
included on the list of available spare parts - and in replacing
it.
If a circuit board is faulty, repairs will consist in replacing the
board and not replacing the faulty electronic component on
the actual board.
Refrain from making any changes or performing any mainte-
nance work not contemplated herein.
Should the problem persist even after following the instruc-
tions described herein, contact Selco's Service Department or
send the machine to Selco for relevant work.
The purchaser is obliged to comply with the directions contai-
ned in the manual. Failure to do so will result in Selco decli-
ning all liability.
3