Function Controls; On/Off - AEMC 3711 User Manual

Function Controls

Model 3711 and 3731 share common functions (On/Off, A,
Buzzer disable, Hold). Even though the Model 3711 is shown in the
examples for these functions, the controls will respond identically for the
Model 3731.

On/Off

The ON/OFF push-button, when pushed actuates power on or power off
with an audible control tone. Upon initial power-up, the instrument will be
in the Ohms function (Ω) and will go to OL until clamped on. When the
ON push-button is pushed and held down, after three seconds the
instrument will beep and provide a self test featuring a full function
display (Fig. 4) followed by status indications for:
a. Status of remaining battery life
(battery symbol blinks, 0-100%) (Fig. 5)
b. Number of stored values in memory
(MEM blinks, 0-99) (Model 3731 only)
Release the ON/OFF push-button to initialize the instrument.
I N S T R U M E N T S
NOISE
HOLD
MEM
MR
Figure 4
Ground Resistance Tester Models 3711 and 3731
Model 3711
®
GROUND TESTER
R .1
m A
–
ON
OFF
Ω
- 14 -
Ω
, Auto-off,
Model 3711
®
GROUND TESTER
I N S T R U M E N T S
NOISE
R .1
HOLD
m A
–
ON
OFF
Ω
Figure 5