Related Manuals for Planet Networking & Communication ICA-1200
Summary of Contents for Planet Networking & Communication ICA-1200
- Page 1 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Full HD PoE/ Wireless Cube IP Camera ICA-1200 / ICA-W1200...
- Page 2 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Copyright Copyright © 2013 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
- Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual for PLANET Full HD PoE/ Wireless Cube IP Camera Model: ICA-1200 / ICA-W1200 Rev: 1.00 (February.2013) Part No. EM-ICA1200 Series_v1...
-
Page 4: Table Of Contents
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Table of Content Chapter 1. Product Introduction ..................6 1.1. Package Contents .................... 6 1.2. Overview ......................6 1.3. Features ......................9 1.4. Product Specification ..................9 Chapter 2. Hardware Interface..................12 2.1 Physical Description.................. - Page 5 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.6 Camera Configuration..................52 3.6.1 Picture ....................52 3.6.2 Privacy Mask..................55 3.7 System....................... 55 3.7.1 System ....................56 3.7.2 Date & Time................... 56 3.7.3 Maintenance..................58 3.8 Video ......................... 60 3.8.1 Common ....................60 3.8.2 Video Profile ..................
-
Page 6: Chapter 1. Product Introduction
Day & Night Functionality The ICA-1200 Series brings the clearest vision at night by featuring 0.5 lux illumination and the 10 red-light LEDs built around the lens. It offers color pictures both in the daytime and nighttime with the built-in CMOS sensor supporting up to 10 meters. - Page 7 Full HD PoE/ Wireless Cube IP Camera ICA-1200/ W1200 Exceptional Image quality Together with powerful image processing attributes like Wide Dynamic Range and 3D Digital Noise Reduction (3DNR) technology, the camera is able to filter the intense backlight surrounding a subject and remove noises from video signal. The result is that an extremely clear and exquisite...
- Page 8 When people pass by or in an emergency situation, the built-in PIR motion detection sensor in the ICA-1200 Series will “detect” and start recording automatically. It is able to detect movement far from 6 meters away. When motion is detected in the specified areas, the additional function of alarm notification can send an e-mail alert or send captured images via FTP upload to a designated storage server.
-
Page 9: Features
WDR Enhancement for enhance visibility under extremely bright or dark environments 2-Way audio support with enhanced audio quality Network and Configuration Compliant with IEEE 802.3af PoE interface for flexible deployment(For ICA-1200) IEEE 802.11n Wireless LAN Capability(For ICA-W1200) WEP / WPA / WPA2-PSK wireless security(For ICA-W1200) - Page 10 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Built-in IR illuminators, effective up to 5~10 meters PIR Sensor Built-in 6m/120 Degree Coverage Video Video Encoder H.264 / MPEG-4 / M-JPEG 1080P mode H.264: 1080P / 640 x 360 / 672 x 352 / 320 x 180 / 160 x 90...
- Page 11 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 File upload via FTP, Samba, SD card or email Notification via email, HTTP, and TCP Alarm Events External output activation Audio alerting output Video Buffer Pre and post alarm buffering Environment 12V DC, 1A Power Requirement IEEE 802.3af (Power over Ethernet)
-
Page 12: Chapter 2. Hardware Interface
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Chapter 2. Hardware Interface 2.1 Physical Description 2.1.1 Terminal Connections Front Panel Side Panel... - Page 13 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Interface Description These LEDs are Infra-Red type by mode. It’s very useful for low-lux environment to provide extra light source for image IR or Red-light LEDs sensor. Lens & focus ring User could use this ring to adjust focus manually.
-
Page 14: Bottom Panel
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 2.1.2 Bottom Panel ICA-1200 ICA-W1200 Interface Description Audio/Video-out Jack allows this device to output audio and video signal. Use the attached A/V cable to connect A/V Audio/Video Output Jack device where white cable is for audio and yellow cable is for video. -
Page 15: Hardware Installation
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 device, please follow the steps below: 1. Make sure the Camera is ready first. Insert the paper clip or other tool and press and hold the button down continuously. 2. Hold it at least 5 seconds and release the tool while the Camera is operating. - Page 16 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Fixed it by Screws 3. Plug an Ethernet cable into the Camera Connect an Ethernet cable to the LAN socket located on the Network Camera’s bottom and attach it to the network.
-
Page 17: Initial Utility Installation
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Once you have installed the IP Camera well and powered it on, the network accessing type LED will turn on. It means the system is booting up successfully. Furthermore, if you have a proper network connection, and access to the IP Camera, the LED will flash green under wired mode or orange under wireless mode. - Page 18 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue. 5. Please click “Install” to start the installation.
-
Page 19: Preparation
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Please click “Finish” to complete the installation and launch program immediately. 2.4 Preparation When you installed the Internet Camera on a LAN environment, you may execute PLANET IP Wizard II to discover camera’s IP address and set up related parameters in the camera. - Page 20 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 When launch the Planet IP Wizard II, a searching windows will pop up. Planet IP Wizard II is starting to search Internet Cameras on the LAN. The existed devices will be listed as below.
-
Page 21: Configure Network By Planet Ip Wizard Ii
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 View If Planet IP Wizard II finds Internet Camera, View button will be available. Please select the camera you want to view and click the View button. Then you could see the Video from camera directly. -
Page 22: Using Upnp Of Windows Xp Or 7
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 If you like to change username and/or password of the device, just click the check button. Then, the related fields will show up as below. After keying in new username and password, click “Submit” button to perform your setting accordingly. - Page 23 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 The “Control Panel” will display on the screen and double click “Add or Remove Programs” to continue. The “Add or Remove Programs” will display on the screen and click Add/Remove Widows Components to continue.
- Page 24 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 The following screen will appear, select “Networking Services” and click “Details” to continue. The “Networking Services” will display on the screen, select “Universal Plug and Play” and click “OK” to continue.
- Page 25 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Please click “Next” to continue. The program will start installing the UPnP automatically. You will see the below pop-up screen, please wait while Setup configures the components.
- Page 26 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Please click “Finish” to complete the UPnP installation Double-click “My Network Places” on the desktop, the “My Network Places” will display on the screen and double-click the UPnP icon with Internet Camera to view your device in an internet...
-
Page 27: Windows 7
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 2.5.2 Windows 7 Go to Start > Control Panel > Network and Internet > Network and Sharing Center, if network discovery is off; click the arrow button to expand the section. Click Turn on network discovery, and then click Apply. -
Page 28: Setup Activex To Use The Internet Camera
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 2.6 Setup ActiveX to use the Internet Camera The Internet Camera web pages communicate with the Internet Camera using an ActiveX control. The ActiveX control must be downloaded from the Internet Camera and installed on your PC. Your... -
Page 29: Internet Explorer 6 For Windows Xp
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Internet Explorer security settings must allow for the web page to work correctly. To use the Internet Camera, user must setup his IE browser as follows: 2.6.1 Internet Explorer 6 for Windows XP From your IE browse ”Tools”... -
Page 30: Internet Explorer 7 For Windows Vista
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 • Allows Script lets • Automatic prompting for ActiveX controls By now, you have finished your entire PC configuration for Internet Camera. 2.6.3 Internet Explorer 7 for Windows Vista From your IE browse ”Tools”... - Page 31 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 • Prompt “Initialize and script active controls not marked….” By now, you have finished your entire PC configuration for Internet Camera.
-
Page 32: Chapter 3. Web-Based Management
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Chapter 3. Web-based Management This chapter provides setup details of the Internet Camera’s Web-based Interface. 3.1. Introduction The Internet Camera can be configured with your Web Browser. Before configure, please make sure your PC is under the same IP segment with Internet Camera. -
Page 33: Live View
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 After logged on, you should see the following messages at the top of Internet Explorer: Click on the message, and click Run Add-on When you see this message, click Run’ to install required ActiveX control After the ActiveX control was installed and run, the first image will be displayed. - Page 34 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Start-up screen will be as follow no matter an ordinary users or an administrator. Video Profile ActiveX Control Streaming Protocol Language Monitor Image Section Setting Menu Client Menu Fisheye Menu Video Information...
-
Page 35: Activex Control
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 user logged into camera as administrator. Item Action Configure Network settings such as IPv6, ONVIF, Network DHCP, DDNS, 3GPP, PPPoE and UPnP. Camera Adjust camera parameters. Configure system information, date & time, System maintenance, and view system log file. - Page 36 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 On the ActiveX control icon, click the Left Mouse Button, then a menu pop-up. This menu provides features that are unique to the ActiveX control. These features include: • Digital Zoom, • Snapshot, •...
-
Page 37: Digital Zoom
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.4.1 Digital Zoom Click Digital Zoom to active this function as above. User can drag or scale the box over the video to adjust zoom ratio and position. 3.4.2 Snapshot Click Snapshot to activate this function. Press Snapshot button to take a picture. The image file is saved as JPEG format into your local PC. -
Page 38: Volume
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 The ASF files can be display by the standard Windows Media Player, but it needs the DixectX 9.0 or later version to be installed. 3.4.4 Volume Click Volume to activate this function. These have two control bars for speaker and microphone volume. -
Page 39: Network Configuration
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.5 Network Configuration Use this menu to configure the network to connect the device and the clients. 3.5.1 Network This section provides the menu of connecting the device through Ethernet cable. Display the Ethernet MAC address of the device. Note that user cannot MAC address change it. -
Page 40: Wireless (For Ica-W1200)
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 A gateway is a piece of software or hardware that passes information between networks. You'll see this term most often when you either log Gateway in to an Internet site or when you're transient email between different servers. - Page 41 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Start PBC Click Start PBC to make instant connection to wireless AP. Easy Installation Click to install wireless connection MAC address Displays the Ethernet MAC address of the WLAN card. Note that user...
- Page 42 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Site survey Click the “Reload” button. It will refresh information window which list is the result of a network scan. Access points with a disabled SSID Broadcast will not appear unless the camera is associated with it. The...
- Page 43 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 WPA settings - WPA Key: Key value of WPA. The device uses a pre-shared key (PSK) for key management. The pre-shared key can be entered either as Manual hex, as 64 hexadecimal characters, or as a Passphrase, using 8 to 63 ASCII characters.
- Page 44 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 5. ICA-HM101W restarting to enable wireless function. 6. Wait for wireless ready 7. Plug out cable to enable wireless function...
-
Page 45: Ipv6
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.5.3 IPv6 Internet Protocol version 6 (IPv6) is called the “IP Next Generation” (IPng), which is designed to fix the shortcomings of IPv4, such as data security and maximum number of user addresses. It is backward compatible and thus expected to slowly replace IPv4, with the two existing side by side for many years. - Page 46 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 want to set up a web or a FTP server, then the Dynamic Domain Name Server is necessary. For more DDNS configuration, please consult your dealer. Your Internet Service Provider (ISP) provides you at least one IP address which you use to connect to the Internet.
-
Page 47: Pppoe
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.5.6 PPPoE PPPoE: Stands for Point to Point Protocol over Ethernet A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet Camera connect to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic IP address. -
Page 48: Upnp
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Choose the RTSP port. The RTSP protocol allows a connecting client to RTSP Port start a video stream. Enter the RTSP port number to use. The default value is 554. Specify the range of transmission port number of video stream. The default RTP Port range is 50000 to 50999. -
Page 49: Bonjour
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 In addition, this device also provides UPnP IGD function for NAT traversal easily. Use NAT traversal when your device is located on an intranet (LAN) and you wish to make it available from the other (WAN) side of a NAT router. -
Page 50: Onvif
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.5.10 ONVIF ONVIF is a global and open industry forum with the goal to facilitate the development and use of a global open standard for the interface of physical IP-based security products. Or in other words, to create a standard for how IP products within video surveillance and other physical security areas can communicate with each other. - Page 51 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 If enable this function, then the “Send to“ and “Subject” field SMTP Notification (e-mail) need to be filled. Type the receiver’s e-mail address. This address is used for Send To reply mail.
-
Page 52: Camera Configuration
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Proxy Login name Type the user name for the HTTP Proxy. Proxy Login Password Type the password for the HTTP Proxy. Custom parameter User can set specific parameters to HTTP server. Message The message will be sent to HTTP server. - Page 53 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Auto: will adjust the white balance automatically. White Balance Hold: will hold the white balance. Auto Exposure: will adjust the internal gain automatically. Hold Exposure: will hold the internal gain. Auto Iris: This Camera is built-in a DC-Iris lens.
- Page 54 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 This value is dependent to “Auto Exposure” only Color Level Large value will be colorful. Change the value will result to color tuning. Brightness Large value will brighten camera. Sharpness Large value will sharpen camera.
-
Page 55: Privacy Mask
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.6.2 Privacy Mask Use this page to specify privacy mask window 1 to window 8 and set the name and gray level for selected window. To add or delete the privacy mask windows, user can specify up to 7 windows to mask the video captured by this device. -
Page 56: System
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.7.1 System You can enter the name of this unit here. It’s very useful to identify the Device title specific device from multiple units. Software version This information shows the software version in the device. - Page 57 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Server Date & Time Displays the date and time of the device PC Time Displays the date and time of the connected PC Synchronize Click this option to enable time synchronization with PC:...
-
Page 58: Maintenance
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Offset 3.7.3 Maintenance Default Settings Recall the device hard factory default settings. Note that click (Include the network this button will reset all device’s parameters to the factory setting) settings (including the IP address). - Page 59 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Note!! That it must make sure that the Firmware only applies to this device, once update, it will be burned into FLASH ROM of system. 6. Once the firmware file was selected, select “Upgrade”.
-
Page 60: Video
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.8 Video This device provides 2 modes of video profile. The first one is 2Mega mode which supports video resolution up to 2 Mega-pixel. The second one is 2Mega mode which supports video resolution up to 2 Mega-pixel. - Page 61 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Name To assign a name to the selected profile. Video Type Video codec of the selected profile. Resolution Resolution of the selected profile. Assign the selected profile as a ROI stream or not. (Only available...
-
Page 62: Roi
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Max Frame Rate Defines the targeted frame rate of this profile. For example, set the frame rate to 15 fps, then the image will be updated for 15 frames per second. User can set the desired max frame rate versus video quality under the limited bandwidth. -
Page 63: Audio
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Add and Del To add or delete the AOI windows. User can specify up to 2 AOI windows to change the video quality in specified areas. By dragging mouse on the image, you can change the position and size of the selected AOI window accordingly Name of the specified AOI window. -
Page 64: User
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Audio To enable or disable audio function. Audio type To select G711 or G726 for audio coding. Audio Mode: To select Simplex or Full duplex (2-way audio) mode. Input Gain: To adjust gain of input audio. -
Page 65: E-Mail
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Select “Anonymous” to allow any one viewing the video once Viewer Login connected. Otherwise, only users in database can view the video after login. Administrator can access every function in this device. -
Page 66: Event Detection
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 SMTP Server Type the SMTP server name or the IP address of the SMTP server. Send a test mail to mail server to check this account is available or Test not. SMTP Port Set port number of SMTP service. -
Page 67: Motion Detection
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.12.1 Motion Detection Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image. To add or delete the motion windows. User can specify up to 4... -
Page 68: Audio Detection
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.12.2 Audio Detection Audio detection alarm can be used as a complement to motion detection. Since audio detection can react to events in areas too dark for the video motion detection functionality to work properly. -
Page 69: Samba Server
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Disk ID This name of SD card. Status This information of SD card. Delete old recorded files while the conditions are reached as Enable automatic disk cleanup below. Remove recordings order than Delete old files by days. -
Page 70: Recording List
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.15 Recording List This page shows the files list information, files list inside the SD Card. User may reload file from SD card that play or remove the selected file. This page shows the files list information, files list inside the SD Card or Samba server. User may... -
Page 71: Event Server Configuration
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.16 Event Server Configuration 3.16.1 FTP Server You may setup FTP parameters for further operation of Event Schedule. That’s, if users want to send the alarm message to an FTP server, it will need to configure parameters here and also add at least one event schedule to enable event triggering as SMTP. -
Page 72: Tcp Server
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 needs to specify a name for each FTP setting. FTP Server Type the server name or the IP address of the FTP server. Test Check the FTP server whether this account is available or not. -
Page 73: Samba Server
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Name User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. Type the server name or the IP address of the HTTP server. - Page 74 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Name User can specify multiple HTTP servers as wish. Therefore, user needs to specify a name for each HTTP server setting. SAMBA Server Type the server name or the IP address of the SAMBA server.
-
Page 75: Event Schedule
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 3.17 Event Schedule This menu is used to specify the schedule of Events and activate the some actions provided by this device. 3.17.1 Setting Name Name of the Event or Schedule. Enable Enable or disable this Event or Schedule. - Page 76 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Example1. Send file to FTP server by motion triggered always: Select event trigger Enable time: start from 00:00 to 24:00 every day Trigger by: Motion Area (Added in Object Detection page) Action : Send FTP (Add in Event Server -> FTP Server page)
- Page 77 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Example2. Send file to E-Mail server by motion triggered from Friday 18:00 to Saturday 06:00 Select event trigger. Enable time: start from Friday 18:00 and keep work in 12 hours, so it will stop on Saturday 06:00.
-
Page 78: Record Configuration
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Example3. Enable Voice Alert every 10-minute during 18:00 to 24:00 from Monday to Friday. 1. Type: Select schedule trigger and interval is 10-minute. 2. Enable Time: Select Monday to Friday, and set start time from 18:00 and keep work in 6 hours. -
Page 79: Port Status
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Record File Type Choose AVI or JPEG file format for record file. Record File Prefix Define the prefix of recorded filename. Pre-Trigger Duration Define the maximum duration of pre-alarm. Best Effort Duration Define the best effort duration of post-alarm. -
Page 80: Appendix A: Ping Ip Address
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix A: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm Internet Camera installed or if the IP address conflicts with any other devices over the network. -
Page 81: Appendix B: 3Gpp Access
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix B: 3GPP Access To use the 3GPP function, in addition to previous section, you might need more information or configuration to make this function work. That to use the 3GPP function, it strongly recommends to install the Networked Device Note with a public and fixed IP address without any firewall protection. -
Page 82: Appendix C: Bandwidth And Video Size Estimation
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix C: Bandwidth and Video Size Estimation The frame rate of video transmitted from the Internet Camera depends on connection bandwidth between client and server, video resolution, codec type, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements for your Internet Camera. -
Page 83: Appendix D: Ddns Application
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix D: DDNS Application 1. Configure PLANET DDNS steps: Step 1: Enable DDNS option through accessing web page of NAS Step 2. Select on DDNS server provide, and register an account if you do not use yet. -
Page 84: Appendix E: Configure Port Forwarding Manually
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix E: Configure Port Forwarding Manually The device can be used with a router. I f the device wants to be accessed from the WAN, its IP address needs to be setup as fixed IP address, also the port forwarding or Virtual Server function of router needs to be setup. - Page 85 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Your WAN IP Address will be listed here. 3. Open/set Virtual Server Ports to enable remote image viewing The firewall security features built into the router and most routers prevent users from accessing the video from the device over the Internet.
- Page 86 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on this line to enable settings. Then the device can be access from WAN by the router’s WAN IP Address.
-
Page 87: Appendix F: Power Line Frequency
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix F: Power Line Frequency COUNTRY VOLTAGE FREQUENCY COMMENTS *Neutral and line wires are reversed from that Argentina 220V 50 Hz used in Australia and elsewhere. *Outlets typically controlled by adjacent switch. - Page 88 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 Appendix G: Troubleshooting & Frequently Asked Questions Features The video and audio codec is The device utilizes H.264, MPEG-4 and M-JPEG triple compression adopted in the device. to providing high quality images. Where H.264 and MPEG-4 are standards for video compression and M-JPEG is a standard for image compression.
- Page 89 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 PLANET IP Wizard II program Re-power the device if cannot find the unit within 1 minutes. cannot find the device. Do not connect device over a router. PLANET IP Wizard II program cannot detect device over a router.
- Page 90 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 The port number assigned in your Internet Camera might not be available via Internet. Check your ISP for available port. The proxy server may prevent you from connecting directly to the Internet Camera, set up not to use the proxy server.
- Page 91 Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 be accessed outside your local LAN. Check the bandwidth of Internet connection. If the Internet bandwidth is lower than target bit rate, the video streaming will not work correctly. The unreadable characters are Use the operating system of the selected language.
-
Page 92: Appendix G:troubleshooting & Frequently Asked Questions
Full HD PoE/ Wireless Cube IP Camera ICA-1200/W1200 24 bit or higher if possible within your computer. The configuration on the device image display is incorrect. You need to adjust the image related parameters such as brightness, contrast, hue and sharpness properly.