Ptz Setting - Planet Networking & Communication ICA-601 User Manual

3.6.2 PTZ Setting

PTZ Protocol Type
Baud Rate
Camera ID
The Network Camera is connected to built-in ICA-601 / ICA-651 and
controls this device thru RS485 bus.
This is the communication speed between network module and ICA-601 /
ICA-651. Note that please DO NOT changes the default value except on
special purpose. If so, user needs to check and set value properly for
both sides
This is the camera ID set in speed dome camera. Note that please DO
NOT changes the default value except on special purpose. If so, user
needs to check and set value properly for both sides
52