Time Sync & Manual Time Setting; Setting The Time Manually - iHome iPL23 User Manual

SETTING THE TIME:
TIME SYNC & MANUAL
TIME SETTING
TIME SYNC
This unit is equipped with auto sync. By default, the unit will sync to the
time on your Lightning-capable iPhone or iPod whenever you dock it in
the Lightning dock. When successful, the updated time will appear on the
display. While the dock accommodates most cases, you may need to
remove your case for proper docking. To manually sync at any time, press
and release the Time Sync/Time Set Button. If sync is unsuccessful, try to
sync again using a different iPhone or iPod. If sync still doesn't work, set
the time manually (see below).

SETTING THE TIME MANUALLY

1. Press and hold the Time Sync/Time Set Button until "MAN" or "SYNC"
flashes in the display with one beep. If "SYNC" is displayed, press the + or
– Buttons so "MAN" appears in the display, indicating manual time setting
mode.
2. Press and release the Time Sync/Time Set Button. The time will flash in
the display.
3. Press the + or – Buttons to set the correct time (hold for rapid
adjustment). Make sure you are setting the time to the correct AM or PM
time. The PM indicator appears at the upper left of the display; there is no
AM indicator. NOTE: The time can be set to standard 12 hour time (AM
and PM) or to 24 hour time (sometimes called "military time"). To toggle
between 12 and 24 modes, press and release the
on top of the unit at any time while display is flashing during manual time
setting mode.
4. Press and release the Time Sync/Time Set Button to confirm the current
time setting (two beeps will sound) and exit time setting mode.
Alarm Button located
5