Bluetooth color changing dual alarm clock radio (20 pages)
Summary of Contents for iHome iBN180
Page 1
NFC Bluetooth FM Clock Radio with USB Charging instruction manual...
Page 2
Introduction Thank you for purchasing the iHome iBN180. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit.
Page 3
FCC Radiation Exposure Statement FCC ID: EMOIBN180 IC: 986B-IBN180 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Table of Contents Meet Your iBN180........................5 The Display/Setting Up the Unit ....................6 Replacing/Installing Backup Batteries ..................7 Setting the Clock/ FM Radio .....................8 Setting and Using FM Presets/Using FM Radio in Other Countries ............9 Setting and Using the Alarm ....................10 Previewing Alarms and Turning Alarms On/Off ................11...
Page 5
Included • iBN180 system • 100V-240V universal AC adaptor • 12 inch audio cable iBN180 12 inch audio cable AC adaptor...
Meet Your iBN180 Bottom NFC Antenna CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Sleep Button (1) This device may not cause harmful interference, and (2) this device must accept any interference received, Mode Button including interference that may cause undesired operation.
Using the The Display Time Display Bluetooth Audio Indicator AM/PM Indicators Bluetooth Alarm Active Indicators Pairing Indicator Low Backup DST Mode Indicator Battery Indicator Sleep Mode Indicator Mode/Wake to Alarm Source Indicators: Tone, Bluetooth device, FM radio, Aux in device...
Using the Replacing and Installing Clock Backup Batteries Note: 2 AAA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained).
Using the Setting the Clock The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the DST Switch to +1 to add an hour or to -1 to subtract an hour.
Using the Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets Button on the unit to turn it on. 1. Press the 2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display.
Using the Setting and Using the Alarms This unit has 2 separate alarms, each set the same way. Below we explain how to set Alarm 1. To set alarm 2, follow the same steps using the Alarm 2 Button.
Using the Previewing Alarms and Turning Alarms On/Off 1. Press and release the Alarm Button to view the current alarm time. 2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm icon.
Bluetooth indicator icon will flash while the unit attempts to pair. “iHome iBN180” should appear on your device’s menu. Once paired with a device, the Bluetooth indicator on the display will stop flashing, then the Bluetooth icon will remain and a confirmation tone will sound and your music will play through the unit.
If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBN180” on the device to connect it. If your device asks for a password, enter 1234 on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its previous mode.
Using the Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display. Play Pause Button on the 3. Adjust the volume output on your device to at least 50%. Press the unit to play audio from your linked Bluetooth device.
Using the Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device.
• Check that all connections are correct and properly plugged in. • Only use the AC adaptor that came with the unit • Make sure your device is properly paired with the iBN180. • Make sure the Power is ON.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Questions? Visit www.ihome.com or call 1-800-288-2792 Toll Free...
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.