Related Manuals for iHome iBT231
Summary of Contents for iHome iBT231
- Page 1 Eng IB Size: 153mm x 120mm Printing color: Black Nov 9, 2016 Model: iBT231 Bluetooth FM Clock Radio with Dual USB Charging instruction manual Questions? Contact Customer Service at 1-800-288-2792...
- Page 2 Introduction Thank you for purchasing the iHome iBT231. This product is designed to provide high quality wireless sound for your Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read it carefully and keep for future reference.
-
Page 3: Table Of Contents
Table of Contents What’s Included ..............................3 Meet Your iBT231.............................. 4 The Display/Setting Up the Unit....................... 5 Replacing and Installing Clock Backup Batteries................6 Setting the Clock/Setting and Using the Alarms.................7-8 Previewing the Alarm and Turning the Alarm On/O ..............8 Snooze/Display Dimmer Button/Sleep Mode/FM Radio ............. -
Page 4: What's Included
What’s Included • iBT231 unit • 2 x AA batteries • 100V-240V universal AC adapter iBT231 power adapter 2 x AA batteries... -
Page 5: Meet Your Ibt231
Meet Your iBT231 Sleep/Clock Adjust Button Presets Button Alarm 1 Button Mode Button Alarm 2 Button Micro- phone End Call/ Minus Settings Button Volume Down/ Volume Up Buttons Power/ Alarm Reset Button Answer Call/ Plus Settings Button Snooze/Display Dimmer Button... -
Page 6: The Display/Setting Up The Unit
Using the The Display Time Display PM/AM Indicators Aux-in Mode Indicator Set Wake-to Sleep Mode Alarm Active Indicator Indicator Low Backup Bluetooth/Pairing FM Radio Mode Battery Indicator Indicator Indicator Alarm Time/Date/Radio Frequency Wake to source: BT (Bluetooth), FM Radio, Buzzer... -
Page 7: Replacing And Installing Clock Backup Batteries
Using the Replacing and Installing Clock Backup Batteries Note: 2 AA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT lit). -
Page 8: Setting The Clock/Setting And Using The Alarms
Using the Setting the Clock Press and hold the Sleep/Clock Adjust Button for 2 seconds until the clock display flashes and a beep sounds. 2. Press the Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. -
Page 9: Previewing The Alarm And Turning The Alarm On/O
Using the Setting and Using the Alarms (Continued) Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. A beep sounds. 2. Press the Buttons to adjust the alarm time to the desired time (hold for rapid setting). -
Page 10: Snooze/Display Dimmer Button/Sleep Mode/Fm Radio
Using the Snooze/Display Dimmer Button To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds during normal operation (when no alarm is sounding). Buttons to select the desired snooze time (between 01 and 29 minutes). 2. Press the 3. -
Page 11: Setting And Using Fm Presets/Using Fm Radio In Other Countries
Using the Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets Press and release the Mode Button as needed until the FM indicator icon appears on the display. 2. Press and release the Presets Button as needed until the preset number (P1- P6) you wish to set is displayed, then press and hold the Presets Button to enter setting mode. -
Page 12: Pairing Your Bluetooth Device
There should also be an indication on your device. If no device is successfully paired within 2 minutes the iBT231 will default to previous mode. Once the iBT231 is paired to a device, it will attempt to autolink when the device is within range (about 33 feet). -
Page 13: Playing Audio Via Bluetooth
Using the Playing Audio via Bluetooth Power/Alarm Reset Button to turn the unit ON. 1. Press the 2. Press and release the Mode Button as needed until “BT” appears on the display.. 3. Press the Play/Pause/Pairing Button on the unit to play audio from your linked pair Bluetooth device. -
Page 14: Playing Audio Via Aux-In
Using the Playing Audio via Aux-In 1. Connect one end of a standard stereo 3.5mm audio cable into the aux-in jack on the back of the unit and the other end into the headphone or output jack of your audio device. -
Page 15: Charging Devices Via Usb Port
Using the Charging Devices via USB Ports Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. It’s often best to use the charging cable supplied with your device. -
Page 16: Battery Use Cautions And Tips
Using the Battery Use Cautions and Tips • Only use the recommended/supplied batteries or equivalent • Use alkaline batteries for longer life • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries •... -
Page 17: Consumer Product Safety Guide
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 18: Fcc Information
FCC ID: EMOiBT231 FCC Radiation Exposure Statement IC: 986B-iBT231 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 19: Troubleshooting
Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT231. • Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) •... -
Page 20: Warranty
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.