Table of Contents Controls and Indicators ..............................1 iP230 Quick Start ................................2 iP230 display / Battery Backup Information ......................... 3 Operating the Unit ................................. 4-6 A Consumer Guide to product Safety ........................... Trouble Shooting ................................Warranty Information ............................... 9 Maintenance •...
Page 3
FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules.
Controls and Indicators Top Panel Dock Mode/Wake to Button Volume Down Button Sleep Button Volume Up Button Alarm Reset / Power Button Forward/Tuning Up Button Alarm 1 Button Alarm 2 Button Play/Pause Button Reverse/Tuning Down Button Snooze/Dimmer Button Rear Panel Time Zone Button AC Adaptor Jack Time Sync/Set Button...
If you prefer to use an insert and don’t have one for your model, please visit www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one. 5:Radio 4:time sync •...
Display Time and Radio Frequency Display Sleep indicator Buzzer indicator Battery Low Indicator PM Indicator Alarm 1, Alarm 2 Indicators FM Radio Indicator iPod Indicator Battery Backup Information This model includes a pre-set clock that was set to USA Eastern time at our factory. You will see the time on the display when you remove the unit from the carton.
Operating the Unit Setting the Clock Time Using Time Sync The Time Sync feature allows you to sync the time setting on the unit to the time on your iPhone or recent model iPod (iPod touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature). 1.
Page 8
Operating the Unit Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Once an alarm is set, press the associated alarm button to view the currently set alarm time and to toggle the alarm on (icon) or off (no icon). 2.
Operating the Unit Using the FM Radio Extend the attached FM radio antenna fully for best reception. Do not alter, strip or attach to other wires. 1. Press and release the Button to turn the unit on. 2. Press and release the Mode/wake to Button as needed to cycle to FM radio mode, indicated by the current radio frequency and the FM icon on the display.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
Trouble Shooting Symptom Possible Problem Solution Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or Plug the AC adaptor into a wall outlet and plug the connector into (no power) the connector is not plugged into the power the power supply jack on the unit supply jack on the back of the unit Wall outlet is not functioning...
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase.
Need help?
Do you have a question about the iP230 and is the answer not in the manual?
Questions and answers